This part fits vehicles with your year, make and model. Please click the Fitment tab below and confirm your engine, chassis and transmission.

Shopping for a different vehicle? To make sure this part fit your vehicle Check The Fit

To make sure this part fit your vehicle Check The Fit

Attention! This part may not fit your vehicle!
To make sure this part does fit your vehicle Check The Fit

Brake Master Cylinder - Mando - New OE Brake Master Cylinder w/ Reservoir, Direct Replacement (Part Number: 17A1049)

  • Price:   $  126.15

  • Availability: In Stock

Check The Fit

  • CTO: KR
  • Emission Code: 1
  • Harmonized Tariff Code (HTS): 8708309000
  • Life Cycle Status Code: 2
  • Original Equipment Manufacturer: Mando
  • Maximum Cases per Pallet Layer: 1
  • Pallet Layer Maximum: 1
  • Refurbished Part: N
  • Remanufactured Part: N
  • Taxable: N
  • Warranty Special: 2 Years Limited Warranty
  • Warranty Special UOM: TX
  • AAIA Part Type Description: Brake Master Cylinder
  • Marketing Description: The Brake Master Cylinder on your vehicle is constantly working, and unfortunately can wear out and start to leak over time. This creates a mushy-spongy brake pedal feeling that often results in an unsafe brake condition because the pedal may sink to the floor when depressed. Mando OE Brake Master Cylinders helps combat this very issue, and bring back the original brake pedal function. Produced in IS/TS certified facilities, Mando meets all the strict requirements to meet factory safety standards of your Hyundai & Kia. Mando - We Are OE!
  • Short Product Description: Brake Master Cyl.

Product Details

Manufacturer:
Mando
Part Number:
17A1049
Manufacturer Part Number:
17A1049
Description:
Brake Master Cylinder
Long Description:
New OE Brake Master Cylinder w/ Reservoir, Direct Replacement
Part Type:
Brake Master Cylinder
Category:
Brake
Subcategory:
Brake Hydraulics
Sales Rank:

Technical Details

Condition:
New
Product Fit:
Direct Fit
Weight:
1.82 lbs.
Height:
8.58"
Width:
4.29"
Length:
4.29"
UOM:
EA
Quantity Sold:
Sold individually
Qty Per Application:
1
Minimum Order Qty:
1
Item GTIN:
843209104939
Item Location:
Carson, CA

Specifications

CTO
KR
Emission Code
1
Harmonized Tariff Code (HTS)
8708309000
Life Cycle Status Code
2
Original Equipment Manufacturer
Mando
Maximum Cases per Pallet Layer
1
Pallet Layer Maximum
1
Refurbished Part
N
Remanufactured Part
N
Taxable
N
Warranty Special
2 Years Limited Warranty
Warranty Special UOM
TX
AAIA Part Type Description
Brake Master Cylinder
Marketing Description
The Brake Master Cylinder on your vehicle is constantly working, and unfortunately can wear out and start to leak over time. This creates a mushy-spongy brake pedal feeling that often results in an unsafe brake condition because the pedal may sink to the floor when depressed. Mando OE Brake Master Cylinders helps combat this very issue, and bring back the original brake pedal function. Produced in IS/TS certified facilities, Mando meets all the strict requirements to meet factory safety standards of your Hyundai & Kia. Mando - We Are OE!
Short Product Description
Brake Master Cyl.

The MANDO Brake Master Cylinder contains no remanufactured components, and is designed to operate in either city or highway driving.

Year Make Model Engine Notes
2006KiaSorento3.5L[New Original Equipment] Auto Trans, w/o ABS; Quantity needed per vehicle: 1
2005KiaSorento3.5L[New Original Equipment] Auto Trans, w/o ABS; Quantity needed per vehicle: 1
2004KiaSorento3.5L[New Original Equipment] Auto Trans, w/o ABS; Quantity needed per vehicle: 1
2003KiaSorento3.5L[New Original Equipment] Auto Trans, w/o ABS; Quantity needed per vehicle: 1

Warranty Information

New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages.

For defective parts, we provide a limited warranty of 30 days from the date received by the original purchaser, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quaity. All items must be in their original condition and must not be damaged due to incorrect installation upon return. If your purchase was damaged in transit, mis-shipped or turned out to be defective, don't worry we will send you a replacement or refund you in full if we are out of stock, upon return of the original order in the orignal condition. We will work with you returning such item\'s back to us and we will send replacement or will issue full refund usually within a few days after receiving the item back. We must be notified within 30 days of delivery of such order. Past 30 days you may claim warranty directly with the manufacturer, if applicable. Used part can be returned for replacement Only. Refund on used part will be issued when we are out of stock or at our discretion only. Please provide pictures if the order was received damaged, incomplete, mis-shiped etc.

  1. New products purchased from our store are covered by a manufacturer warranty. The manufacturer will allow the parts to be covered by their warranty provided that the part was not modified by the buyer.
  2. Under NO circumstances will our liability exceed the amount of the original sale.
  3. Products damaged as a result of abuse, misuse, improper repairs or maintenance, improper installation, alteration, or modification will not be covered by the warranty.
  4. All returned items must have the RA (Return Authorization) number written outside the shipping box prior to return. The RA Numbers can be obtained by creating a return from within your account. Returned items without RA numbers will not be accepted. 
  5. Our liability does not cover lost or stolen packages mailed back by the customer containing the parts being claimed under warranty. Because the customer is the shipper, customer is the only one who can file any lost claim with the shipping company. Therefore, the claim must be coordinated and processed through the shipping company by the customer. 


Can't find what you are looking for? Try searching by one of these methods below.